The Problem
Cracks of defects between connection joints
To accommodate the expected movements or deformations between gypsum plaster systems and other structural components, manufacturer and european standards recommend seperation strips before the drywall mounting.
On closer examination the main reasons why these are not applied is that:
– affixing the separator strips to the profile or wall is very time consuming
– the strips or tapes don’t adhere properly to the walls since construction sites tend to be dusty and it needs additional cleaning
– also silicon or acrylic filled hollow grooves are used – although they cannot absorb the expected movements
Several European drywall standards point to the inadmissibility of these manufacturing processes.
What follows are lengthy quarrels due to cracks ……
The Solution
MONTAPE – Dry-walling simply better
With MONTAPE, we have developed a real problem solver. The patented combination of divider strips and sealing tape combines several lengthy workings steps into a single one and gives every builder a simply better solution to achieve a flawless connection joints.
+
Recommended component separation
Several lengthy working steps are necessary to achieve a manufacturer compliant component separation – which can accommodate the expected movements or deformations of the components. Cracks and defects often arise between gypsum plaster systems and other structural components.
On closer examination the main reasons are often:
– separator strips are not applied or forgotten
– the strips don’t adhere properly since onstruction sites are often dusty and the site needs to be cleaned
– silicon or acrylic filled hollow grooves
Several European drywall standards point to the inadmissibility of these manufacturing processes. What follows are lengthy quarrels due to cracks ……
a lot these connections are poorly executed because:
A flawless manufacturer and standards compliant connection joint – can accommodate the expected movements or deformations of the connected components – but several lengthy working steps are needed.
+
The Processing
Drywalling simply better
With MONTAPE, we have developed a real problem solver. The patented combination of divider strips and sealing tape combines the lengthy workings steps into a single step and and gives every builder a simply better solution to achieve and defect-free connection joints:
- No divider strips affixed before the drywall mounting.
- Hollow grooves filled with silicon and acrylic.
- Poorly executed, non vendor compliant joints.
The Solution
MONTAPE
With MONTAPE, we have developed a real problem solver. The patented combination of divider strips and sealing tape gives every builder the possibility to achieve simply better and defect-free connection joints :
Several European drywall standards point to the inadmissibility of these manufacturing processes. What follows are lengthy quarrels due to cracks and construction defects, especially as responsibility usually lies with the dry walling company.
The Processing
The processing is very easy and several European drywall standards point to the inadmissibility of the aforementioned manufacturing processes.
Build correctly – automatically
- simply better
- faster
- more professionally
- vendor and standards compliant
The process could not be easier.
With Montape*, we have developed a real problem solver. The patented combination of divider strips and sealing tape gives every builder the possibility to achieve defect-free connection joints:
Several European drywall standards point to the inadmissibility of these manufacturing processes. What follows are lengthy quarrels due to cracks and construction defects, especially as responsibility usually lies with the dry walling company.